Overview FW Check AirmanJob SummaryCompany instructor who performs an oversight, safety and qualification role for Helicopter and/or Fixed Wing pilots undergoing evaluation. Conducts training and flight checks in a classroom, an aircraft, or in a flight simulator.Essential Functions and Responsibilities include the following:• Evaluate operational compliance including all aspects of safety, flight operations, maintenance operations, and other procedures and policies as described in the General Operations Manual• Initial and Recurrent training (ground and flight)• Transition, differences and ROC (restricted operations checks) ground and flight training• Will correct and report out-of-compliance issues immediately. When unable to be corrected immediately, the CA will coordinate with the ACP and Regional Aviation or Maintenance Director as appropriate to ensure the problem is corrected• Assist in the development and implementation of flight and ground training schedules• Ensure that standardized training and checking procedures, provided by the certificate are adhered to• Assist the CP and ACP in all pilot record keeping requirements in accordance with applicable FARs and policies• Assist in the development and implementation of flight and ground training schedules • Submit required reports in a timely manner• Expected to operate advanced aviation training devices and operate full motion simulators as required• Assist the CP in the development of the aircraft checklist and Air Methods’ Pilot Training Programs • Will assist in development and conduct (as appropriate): Basic Indoctrination Training, initial and recurrent ground training, initial and recurrent flight training, instrument training (ground and flight), and night vision goggle (NVG) training (ground and flight) • Other duties as assignedAdditional Job Requirements• Regular scheduled attendance• Indicate the percentage of time spent traveling (centralized)• Indicate the percentage of time spent traveling (decentralized)Subject to applicable laws and Air Method’s policies, regular attendance is an essential function of the position. All employees must follow Air Methods’ employment practices and policies.Supervisory ResponsibilitiesThis position has no supervisory responsibilities. QualificationsTo perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.Education & Experience• High school diploma or general education degree (GED); and three to five years related experience and/or training; or equivalent combination of education and experience• Bachelor’s degree preferred• Recommendation from a current Air Methods Flight Instructor or Check Airman preferred• Previous Instructor/Check Airman experience• ATP rating in aircraft category preferred• Commercial/Instrument rating required• Must meet total flight hour requirementsInstrument Flight Rules (IFR) Program:2500 total flight hours with minimum of 2000 flight hours in category.1000 hours PIC in category.500 hours of cross-country flight time, at least 50 hours of which were at night500 hours of turbine time100 hours night flight time100 hours of flight in actual instrument conditions in categorySkills• Excellent verbal and written communication skills• Ability to implement training programs (initial and recurrent training)• Ability to work in a collaborative manner with all levelsComputer Skills• Intermediate Microsoft Office Suite, including Excel, Word, and OutlookCertificates, Licenses, Registrations• CFI / CFII (Rotor wing) or willingness to obtain within one yearThis position is subject to drug and/or alcohol testing per the DOT/FAA requirements (pre-employment, random, reasonable cause/suspicion, post-accident).Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Minimum pay USD $114,000.00/Yr. Maximum Pay USD $119,000.00/Yr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)Job SummaryCategory: Aviation OperationsPosition Type: Regular Full-TimeRemote: YesLocation: US-CO-Watkins
...Description Summary: Responsible for patient assessment, patient care planning, and provision of quality nursing care to an assigned group of patients for a defined work period. Provides direction and supervision to LVN/LPNs, nursing assistants, unit secretaries,...
Job Description JoinOur Team as aWork-From-Home Data Entry ResearchPanelist! Are youready toearnmoney from the comfort of your own home?Thisexcitingopportunity is perfect for anyone with avariety ofskillsandbackgrounds - whether you'vebeen anadministrative assistant...
...characteristics protected by law. We encourage individuals from all backgrounds to apply. DMS is seeking a Corporate Development Administrator (CDA) to support corporate development, business development, and task order management activities. The corporate development...
...We are seeking candidates for a CNC Operator Responsibilities of a CNC Operator: Set up and operate CNC spring-coiling equipment. Read blueprints, work orders, and setup instructions. Adjust tooling and machine settings to meet specifications....
...their own unique way, plays an important part, every day. Assists with screening, record keeping, orientation, and training of volunteers under the direction of the Director of Volunteer Services to support the continued growth and maintenance of the Volunteer...